Forum Options

« Back to Engines and Rolling Stock Topics

Sign In above to begin adding replies.
 

Romulus boiler

kevinbennett

Joined: 9-10-16

Topics: 1

Replies: 2

Posted: Sun 9th Oct 2016, 10:53pm
Romulus boiler

Where can I find a drawing for a Romulus boiler please ?
 

Replies To This Post

Peter Beevers

Joined: 9-10-01

Topics: 3

Replies: 134

Posted: Mon 10th Oct 2016, 6:19am

Reeves
 

Xz

Joined: 1-01-92

Topics: 17

Replies: 244

Posted: Mon 10th Oct 2016, 7:56am

Last time I looked there were two, one for steel and one copper.

Reeves 2000 are the copyright holders, for Romulus drawings.
 

kevinbennett

Joined: 9-10-16

Topics: 1

Replies: 2

Posted: Mon 10th Oct 2016, 8:43am

Ok, thanks for the quick replies.
Think they only sell a complete set for £85 ... but I'll ask if they have the boiler as a separate drawing.
 

Xz

Joined: 1-01-92

Topics: 17

Replies: 244

Posted: Mon 10th Oct 2016, 9:45am

They certainly only list full sets, but best to ask if they will supply just one. I just checked and you need sheet 9 for steel and sheet 10 for copper.

Bob.
 

bruce morgans

Joined: 21-01-05

Topics: 6

Replies: 18

Posted: Wed 15th Feb 2017, 11:46am

Hi Bell Boilers made my Romulus steel boiler and to the best of my knowledge have made many. I'm sure they have a working drawing. At the time I placed my order Wayne Bell recommended using larger diameter tubes and I agreed, a decision I do not regret as the boiler steams brilliantly. The tubes used were 7/8"OD 14SWG.
Regards Bruce
 

kevinbennett

Joined: 9-10-16

Topics: 1

Replies: 2

Posted: Wed 15th Feb 2017, 4:43pm

Hi Bruce, thanks for the reply. I have had a new boiler made by Holt Boilers - good price and quick turn around too.
 
 
« Back to Engines and Rolling Stock Topics

Web design by Slingshot